鋁板被廣泛的應用到了鋁塑板、鋁天花、防火貼面板、車庫門等產品的生產中，但是也存在一定不足之處，就是時間久了不注意防護鋁板，就會出現腐蝕現象，下面濟南廣大鋁業的專家給大家詳細分析一下鋁板被腐蝕如何有效防治？

1、車間、倉庫房頂有漏雨、雪的地方，不應放置鋁板；加強空氣干燥的管理，確保壓縮空氣中無水。
Workshop, warehouse roof has leaks, snow, should not be placed aluminum; strengthen the management of dry air and ensure that the compressed air in the anhydrous. 

2、鋁板的包裝應采用密封包裝，同時每卷應放入適量的干燥劑；由低溫區運入溫度高、濕度大的地區時，不要立即開啟密封包裝。
Aluminum plate packaging should be sealed packaging, at the same time each volume should be put in the appropriate desiccant; by the low temperature zone into the high temperature, high humidity areas, do not immediately open the sealed package. 

3、加強鋁板軋制油的管理，其含水量控制在0.04%以下。
To strengthen the management of aluminum rolling oil, the water content of the control in the following 0.04%. 

4、包裝箱的木軸、箱板的濕度不大于18%，包裝彩色鋁板的溫度不大于45℃。
The humidity of the wood shaft and the box board of the packing box is not more than 18%, and the temperature of the packaging color aluminum sheet is not more than 45.