濟南鋁板http://www.www.yun-zhifu.com/產生變色、脫色，主要是由于板材選用不當造成的。濟南鋁板分為室內用板和室外用板，兩種板材的表面涂層不同，決定了其適用的不同場合。室內所用的板材，其表面一般噴涂樹脂涂層，這種涂層適應不了室外惡劣的自然環境，如果用在了室外，自然會加速其老化過程，引起了變色脫色現象。

1、濟南鋁板開膠、脫落，主要是由于粘結劑選用不當?shù)摹Ｗ鳛槭彝怃X塑板工程的理想粘結劑，硅酮膠有著得天獨厚的優越條件。以前，我國的硅酮膠主要依賴進口，其身價令很多人望而卻步，只有那些高層建筑上身價不菲的幕墻工程才敢于問津。
Jinan aluminum plastic, loss, mainly due to improper use of the adhesive. As an ideal outdoor adhesive aluminum plate works, silicone rubber has a unique advantage. Previously, our silicone rubber mainly rely on imports, its worth a lot

of people stay away, only those worth a lot of money on high-rise building curtain wall engineering dared cares.
　　
2、濟南鋁板表面變形、起鼓的那些大煞風景的工程，小小的門面裝修工程上這種現象，大型高層建筑上也有這種現象。
Jinan aluminum surface deformation, from the dark too unpleasant for those projects, a little of this phenomenon on the facade renovation, there are a large high-rise building on this phenomenon.

3、濟南鋁板http://www.www.yun-zhifu.com/在裝修建筑物表面時，板塊之間一般都有一定寬度的縫隙。為了美觀的需要，一般都要在縫隙中充填黑色的密封膠。在打膠時有些施工人員為了省時的需要，不用紙膠帶來保證打膠的整齊、規矩，而是利用鋁塑板表面的保護膜作為替代品。由于鋁塑板在切割時，保護膜會產生不同程度的撕裂情況，所以用它來做保護膠帶的替代品，不可能把膠縫收拾得整整齊齊。
Jinan aluminum surface in the decoration of buildings, generally have a width of the gap between the plates. For aesthetic needs, are generally required to fill the black sealant in the gap. When gluing some construction workers to the needs, not paper tape saving to ensure neat sealant, the rules, but the use of aluminum plate surface protective film as a substitute. Since the aluminum plate during cutting, protective film will produce different degrees of tear circumstances, so use it for protection alternatives to tape, it is impossible to glue seam straight and neat.